中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
NB/T 20009.2-2010 壓水堆核電廠用焊接材料 第2部分:1、2、3級設備用低合金鋼焊條(中英文版) Welding material for pressurized water reactor nuclear power plants. Part 2: Low alloy steel covered electrodes for Class 1, 2, 3, components |
|||
GB/T 7760-2003 硫化橡膠或熱塑性橡膠與硬質板材粘合強度的測定 90°剝離法(中英文版) Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method |
|||
SJ 2530.14-1984 塑膠注射模零件 帶螺紋頂杆(中英文版) (Plastic injection molding parts with threaded plunger) |
|||
DL/T 1270-2013 火力發電建設工程機組甩負荷試驗導則(中英文版) Load rejection test guide for turbine in fossil fired power construction plant |
|||
HG/T 5096-2016 反應嫩黃w7g(中英文版) (Response to tender yellow W7G) |
|||
GB/T 14736-2009 港口裝卸用吊環使用技術條件(中英文版) Specification for the operation of the hanging ring used in the port for cargo handling |
|||
GB/T 16850.7-2001 光纖放大器試驗方法基本規範 第7部分:帶外插入損耗的試驗方法(中英文版) Basic specification for optical fibre amplifier test methods--Part 7:Test methods for out-of-band insertion losses |
|||
GB/T 29629-2013 靜止無功補償裝置水冷卻設備(中英文版) Water cooling equipment for static var compensators |
|||
HG/T 3219-1999 搪玻璃平面閥(中英文版) Glass - lined face valve |
|||
SJ 20075-1992 半導體積體電路jμ8259a型可程式設計中斷控制器詳細規範(中英文版) Detailed specifications for Jμ8309 programmable interrupt controller of semiconductor integrated circuit |
|||
GB/T 39648-2020 紡織品 色牢度試驗 數位圖像技術評級(中英文版) Textiles—Tests for colour fastness—Determination of colour fastness grades by digital imaging techniques |
|||
TB 1223-1980 (中英文版) (C3 stokers Bei Gou rose ring repair rating) |
|||
HG/T 2055.2-2007 搪玻璃帶視鏡人孔(中英文版) Manhole with glass sight for glass lined steel vessel |
|||
GB/T 223.59-2008 鋼鐵及合金 磷含量的測定 鉍磷鉬藍分光光度法和銻磷鉬藍分光光度法(中英文版) Iron,steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method |
|||
GB/T 38739-2020 衛生殺蟲藥劑安全使用準則 滅幼劑類(中英文版) Standards for safety application of public health insecticides—Larvicides |
|||
CJ/T 107-1999 城市公共交通客運設施 城市公共汽、電車候車亭(中英文版) Shelter of bus and trolleybus for urban public transport facilities |
|||
GB/T 5095.15-1997 電子設備用機電元件 基本試驗規程及測量方法 第15部分:接觸件和引出端的機械試驗 第八篇:試驗15h接觸件固定機構耐工具使用性(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 15:Mechanical tests on contacts and terminations--Section 8:Test 15h--Contact retention system resistance to tool application |
|||
SJ/T 11165-1998 用於光纖系統(或分系統)帶尾纖或不帶尾纖的pin-fet模組空白詳細規範(中英文版) Blank detail specification of PIN-FET modules with/without pigtail for fibre optic systems or subsystems |
|||
GB/T 25070-2019 資訊安全技術 網路安全等級保護安全設計技術要求(中英文版) Information security technology—Technical requirements of security design for classified protection of cybersecurity |
|||
TB/T 2007-1997 電氣化鐵道接觸網絕緣污穢等級標準(中英文版) (Electrified railway catenary insulation contamination level standard) |
|||
GB 50877-2014 防火捲簾、防火門、防火窗施工及驗收規範(中英文版) Code for installation and acceptance of fire resistant shutters, fire resistant doorsets and fire resistant windows |
|||
GB/T 36648-2018 TFT單體液晶材料規範(中英文版) Specification for TFT liquid crystal monomers |
|||
GB/T 26953-2011 焊縫無損檢測 焊縫滲透檢測 驗收等級(中英文版) Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels |
|||
SB/T 10131-2012 沖印式硬糖成型機技術條件(中英文版) Technical specifications for stamping hard candy forming machine |
|||
YY/T 0700-2008 血液和體液防護裝備 防護服材料抗血液和體液穿透性能測試 合成血試驗方法(中英文版) Clothing for protection against contact with blood and body fluids. Determination of the resistance of protective clothing materials to penetration by blood and body fluids. Test method using synthetic blood |
|||
GB/T 20899.8-2007 金礦石化學分析方法 第8部分:硫量的測定(中英文版) Methods for chemical analysis of gold ores - Part 8:Determination of sulfur contents |
|||
GB/T 6398-2017 金屬材料 疲勞試驗 疲勞裂紋擴展方法(中英文版) Metallic materials—Fatigue testing—Fatigue crack growth method |
|||
YD/T 504-1991 短波長光時域反射測試儀技術條件(中英文版) Technical conditions for short-wave long optical time domain reflectoscopes |
|||
QB/T 2852-2007 雙烷基(C14~C18)二甲基鹵化銨(中英文版) Dialkyl dimethyl ammonium halides (C14~C18) |
|||
SY/T 5656-1993 石油產品殘炭試驗器(康氏法)技術條件(中英文版) (Carbon residue of petroleum products tester (Conradson method) technical conditions) |
|||
GB/T 10217-2021 電工控制設備造型設計導則(中英文版) Design guide of the outline and structure for the electric control equipment |
|||
GB/T 17980.137-2004 農藥 田間藥效試驗準則(二) 第137部分:馬鈴薯抑芽劑試驗(中英文版) Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 137:Restrain shoot medicament trials on potato |
|||
QB/T 1304-1991 管式殺菌器(中英文版) (Tubular Sterilizer) |
|||
GB/T 32240-2015 自動擠奶設備 要求及測試方法(中英文版) Automatic milking installations—Requirements and testing |
|||
SN/T 3173-2012 桃白圓盾蚧檢疫鑒定方法(中英文版) Detection and identification of Epidiaspis leperii (Signoret) |
|||
QC/T 616-2011 c型通孔式嵌裝塑膠螺母(中英文版) Plastic expansion nut with open end. Type C |
|||
YD/T 1375-2007 2ghz td-scdma/wcdma數位蜂窩移動通信網iu介面測試方法(第一階段)(中英文版) 2GHz TD-SCDMA/WCDMA digital cellular mobile communication network Iu interface test methods (the first stage) |
|||
JC/T 904-2002 塑性體改性瀝青(中英文版) Atactic polypropylene (APP)modified bitumen |
|||
JT/T 56-1993 船用柴油機緊配螺栓及螺母修理技術要求(中英文版) Technical requirements of fit bolt and nut repair for marine diesel engine |
|||
FZ/T 64062-2017 熱熔薄膜粘合襯(中英文版) Hot-melt tninfilm interlinings |
|||
GB/T 24683-2009 植物保護機械 灌木和喬木作物用風送式噴霧機 試驗方法(中英文版) Equipment for crop protection - Test methods for air-assisted sprayers for bush and tree crops |
|||
JJG 607-1989 聲頻信號發生器檢定規程(中英文版) Verification Regulation of audio-frequency signal generator |
|||
SN/T 1429.9-2007 進出口資訊技術設備檢驗規程 第9部分:液晶顯示器(中英文版) Rules for the inspection of information technology equipment for import and export. Part 9: Liquid crystal display devices |
|||
NB/T 34052-2017 工礦用地複墾區宜能非糧地劃分檢驗標準(中英文版) (Mining land reclamation area should be able to divide the inspection standards for non - grain land) |
|||
GB/T 8190.10-2010 往復式內燃機 排放測量 第10部分:壓燃式發動機瞬態工況排氣煙度的現場測量用試驗迴圈和測試規程(中英文版) Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions |
|||
SJ 1651-1980 3dd262型、3dd263型npn矽擴散檯面低頻大功率三極管(中英文版) Detail specification for silicon NPN diffused mesa low-frequency high power transistors, Type 3DD262 and 3DD263 |
|||
GB/T 11318.3-1996 電視和聲音信號的電纜分配系統設備與部件 第3部分:電視調製器通用規範(中英文版) Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 3:Generic specifications for TV modulator |
|||
DL/T 369-2010 電站鍋爐管內壓蠕變試驗方法(中英文版) Method for internal pressure creep test of boiler tubes |
|||
JJG 1040-2008 數字式光干涉甲烷測定器檢定儀檢定規程(中英文版) Verification Regulation of Digital Measuring Device for Optical Interference Methane Detector |
|||
HJ/T 34-1999 固定污染源排氣中氯乙烯的測定 氣相色譜法(中英文版) Stationary source emission. Determination of vinyl chloride. Cas chromatography |
找到:115477條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [1120] [1121] [1122] [1123] [1124] [1125] [1126] |